A következő címkéjű bejegyzések mutatása: Free English Tutorials. Összes bejegyzés megjelenítése
A következő címkéjű bejegyzések mutatása: Free English Tutorials. Összes bejegyzés megjelenítése

2015. július 20., hétfő

Earrings and Pendant from crescent beads


Earrings:

Material:

  • 16 pcs of crescent beads
  • 32 pcs of 3mm rounds or fire polished beads
  • any kind of beads, which fit to the ends
  • any kind of beads to fill in the middle
  • 2 pcs of headpins
  • earwire
  • thread
  • needle
String  one crescent bead,  one  3mm round eight times:
Make a knot forming a circle:
Pull it tight and go through a few beads to hide the knot.  Come out of one crescent bead and pass through the free hole of that bead. String 3mm rounds between the free holes of crescent beads:
Pass through the second row a few times tigthening your work.  Make half stich knots and cut the ends of the thread. It remained only to put together the whole with headpins. Pin any kind of beads at your choice. I used 4mm rounds, some special beads and lentils:
Pin all the beads to headpin and cut the end of the headpin. Make a loop at the and. Here is a tutorial about loops: Basic loops


Attach the earwire and you are ready! Here is  another pair with different beads. I used 1cm round to fill in the middle:


 Pendant:
Material:

  • 1  cabochon
  • crecent beads, the amount depends on the size of your cabochon
  • 3mm rounds, the amount depends on the size of your cabochon
  • size 11 sead beads to bezel the  cabochon
  • bail
  • thread
  • needle
The starting is similar to the earrings first step. The only difference is that you have to string two crescent beads togehter. String as many  units as needed to surround the cabochon tightly.


Make a knot forming a circle. Similar to the earrings string another row of  3mm rounds between the free holes of the crescent beads:


Pull it tight. The circle must be so tight that one end of the crescent beads must bent above the cabochon stopping it from jumping out of the whole work.
 Turn the work to the back side. Thread five 11 size sead beads between the crescent beads then  three 11 size sead beads between the top of  the sead bead groups:

Pull it tight, go through the last row again and the bezel is ready.
Attach the bail and the work is finished.

Congrats!











2015. május 25., hétfő

Tila beads cube
The Japanese tila bead is entirely different from its czeh counter pair. My previous tutorial was about cubes with czeh tile beads, this one is about cubes with Japanese tila beads.
Materials
  • 9 pcs tila beads (Japanese) 
  • 48 pcs 11 sized seed beads, smaller ones are better or you can use 3  on one edge if 4 are too many 
  • 7pcs 15 sized seed beads
  • 1 piece 8 sized seed bead or a drop
Work with two needles. Weave trough both holes of the first tila bead.
String one more tila bead and sew through the first bead from back, fixing the two tila beads together, weave through them more times, until the work is tight . 
Continue in the same way, fixing together in total 5 tila beads:
Continue with the four faces of the cube. Sew 4 tila beads to 4 faces of the work. Sew using the holes of second tila of the 5 tilas row. Pass through the tilas as many times as needed to tighten the whole work and make the cube regular.
Now only the "decoration" remained.  Sew 4 pcs 11 seed beads to each edge of the cube. Firstly add 4 tilas for 4 edges which are parallel with each other, then sew 4-4 seed beads  between the already added seed beads. Fix the seed beads to both of the faces forming the actual edge.. 




At last add 7 15 sized seed beads to the corners and one 8 sized to one corner. Weave through the edges until the whole work is tight. If the seed beads are too big then use only 3 instead of 4 for one edge.
The cube is ready:

Enjoy your work!






Cube from tile beads.
Materials:

  • 6 pcs tile beads
  • 48 pcs seed beads, metallic are the best
  •  7pcs 15 seed beadfs 
  • 1 piece of  drop
I used dark thread to show you the steps better, but nylon thread is fine for it.
Start with two needles:

Weave across the two holes of one tile bead:
String three more tile beads with both needles:
Pass through all 4 tiles from back:
Pull it tight and tie a knot with the two threads.
From this point you can continue with one needle. Use alternate needles. 
Sew the remained two tiles on the bottom and top of the work:


Pull the work tight, weave trough the whole as many times as needed to tighten well. You can arrange the tiles with the needle until the cube is regular.
Sew four seed beads to each edge of the cube.  Fix the four beads to both faces of the cube.




Here you can see that the seed beads are fixed to both faces forming the edge:

Sew four seed beads between the former 8 seed beads on both sides. Now one face is surrounded by seed beads:

Continue adding the seed beads, firstly for those faces which already have four seed beads on their edge:

At last sew 15 size seed beads into 7 corners and one drop in one corner. Weave through the drop from two directions, because this will be used for hanging the cube and should be tight. You can use it for earrings or key rings.



It is ready! Enjoy it!